Halls Qube+

INSTALLATION TERMS AND CONDITIONS

Please read through the following information carefully to ensure the installation process is carried out smoothly and efficiently.
It is your responsibility to ensure the following:
You must have either purchased a steel base, or have purchased a greenhouse with an integral base/base included.
• A level, flat and true concrete or slabbed base must be pre-laid in readiness
• When preparing your base please ensure you have checked the correct dimensions. These can be found in your greenhouse instruction manual. If you are preparing your base before your greenhouse has been delivered you can contact customer service to check the size that is right for your model or you can find a copy of the instructions on our website with all the relevant information.
• If you are building a concrete pad you may wish to consider allowing for drainage.
• The area/site where the greenhouse will be located must be free from any obstructions e.g. overhanging branches, power lines, manhole covers etc.
• The area should allow the building to be installed providing access to all sides. We recommend a minimum of 2ft clearance.
• Ensure you have checked whether planning permission may be required and that all building regulations are adhered to.
• Ensure you have pre-checked your garden building at least 72 hours before your installation reporting any problems to Customer Service on 01242 676625. This means that you must have checked that the parcels received tally with those listed on the delivery note.
• The greenhouse installation does not include the preparation of the site or removal of the old greenhouse. Some of the fitters are willing to offer this service but you will need to check with them and agree a price directly with them.
• Accessories other than autovents, louvres, downpipes, roof vents and cresting are NOT included in the installation price.
• We aim to carry out installations within two weeks of delivery however this may not be possible at all times or in outlying areas.
• Where return visits are required after job has been signed off you may incur a call out fee of £75 which will be refunded if there is a fault with product.
If an installer is unable to carry out work on day of arrival due to the above terms not being adhered to, you will be liable to pay the installer for any additional costs incurred.

The installer is asked to secure your greenhouse to the concrete/slabbed base. If they are unable to do this for any reason this should be noted on the Installation Sheet that you are asked to sign when they have completed the installation.
The installer is asked to leave the site clean and tidy, but is NOT required to dispose of the packaging.
If you have any other questions or would like general advice please call Customer Service on 01242 676625, option 1.

To indicate your understanding we kindly ask you to sign and date a copy of the terms and conditions

It's important that the greenhouse is built on a strong and stable base, which is secured properly to the ground.

We always recommend to purchase an original steel base, consisting of 12 cm high galvanized steel profiles. These are assembled with brackets which double as ground anchors that are concreted into the ground.

The holes for the ground anchors can be made with a post hole auger. The casting should reach frost-free depth (80 cm).

When installing the greenhouse on a solid foundation for example a concrete pad it's advisable to start by making a square as big as the greenhouse + at least 20 cm.

Here you'll see an example of how the base is assembled and casted:

Assembly and adaptation of foundation for Juliana greenhouse

Casting of foundation

It's also possible to install the greenhouse on a slab of concrete or a base of durable wood. However, this is time consuming work.